JUNG eNet radio blinds actuator 1-gang mini

Controlling electrically driven blinds, shutters and awnings

Operation with suitable eNet radio transmitters

Installation in flush box with dimensions according to DIN 49073 in combination with a suitable cover

Mounting in surface-mounted housing or mounting adapter (ref.-no. FM-EBG) for false ceilings

Operating mode switch for switch-over to blind actuator, shutter actuator or parameterisation via eNet server

Positioning of the blind and slats via light scene recall

Position for sun protection and twilight can be saved

Status feedback to radio transmitter

Switchable output with Prog button

Blind/shutter running time can be saved

Slat change-over time can be saved

Fabric-stretching for awnings

Status indication with LED

Can be set with eNet server:

Change-over time for direction change

Running direction invertible

Operating locks

Position for sun protection, twilight, lock-out protection and wind alarm

Supplementary functions with eNet server:

Fully-encrypted radio transmission (AES-CCM) from eNet server software version 2.0

Update of the device software

Repeater function

Reading of error memory

Technical data

Rated voltage: AC 230 V ~

Mains frequency: 50/60 Hz

Ambient temperature: −25 ... +70 °C

Minimum actuation time in operating mode

Blind: 0.1 s

Shutter: 0.3 s

Contact type: µ

Stand-by power: max. 0.5 W

Running time: 1 ... 600 s

Running time default setting: 120 s

Slat adjusting time: 0 ... 10 s

Connected load

Motors: 1000 W

Connection mode: screw terminals

single wire: 1 x 0.75 ... 4 mm²

stranded with ferrule: 1 x 0.75 ... 2.5 mm²

Dimensions (Ø x H): 53 x 28 mm

Radio frequency: 868.0 ... 868.6 MHz

Transmitting power: max. 20 mW

Transmission range in free field: typical 100 m

Receiver category: 2